I think it is the setting in OVZJ that causes this. V_V2 will not allow a partial confirmation.
See SAP note 33084. You need to have a value of "E" for the relevant sales area.
I think it is the setting in OVZJ that causes this. V_V2 will not allow a partial confirmation.
See SAP note 33084. You need to have a value of "E" for the relevant sales area.
try this,
handleGoPress: function(oEvent) {
this.showDetails(oEvent);
},
Hi there
Why would the "Revaluation" value be displayed in the "Reval. Ord. Dep" line in AW01n after an intra-company transfer?
We have performed a revaluation on an asset using a A1 transaction type (group) through transaction code ABAW via a restated cost/depreciation posting.
E.g. Raised "Revaluation" for333,333 and "Reval. Ord. Dep." for 33,333 with a net effect of 300,000.
We then transferred this asset from one asset to another via ABUMN (gross value transfer).
If we look at the receiving asset values via transaction code AW01n we get:
1) The receiving asset PLANNED "Reval. Ord. Dep" of 33,333 is correct , but the POSTED "Reval. Ord. Dep" now has a value of 333,333 in it. Why?
2) The underlying tables ANLC are correct for "Reval. Ord. Dep" at 33,333
3) The value for "Reval. Ord. Dep" are correct for subsequent years at 33,333.
4) The netbook value for the POSTED value of the asset is correct (the AW01n seems to ignore this incorrect value of 333,333).
5) The values are transferred via ASKBN correctly (333,333 for Revaluation and 33,333 for Reval. Ord. Dep).
Why is AW01n displaying incorrectly for posted values?
Regards
Joe
SAPupConsole.log
======= This is SAPup release lmt_004 V58.000 - all engines are running =======
Target SAP system is 'DSM'.
Running module 'MOD_SELROADMAP' to select correct roadmap.
> 2015/07/06 11:25:27 BEGIN INITIAL MODULE Select roadmap
>> 2015/07/06 11:25:27 START OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
Determined kernel release as 721, 64 bits. System is UNICODE.
<< 2015/07/06 11:25:31 END OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
>> 2015/07/06 11:25:31 START OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
<< 2015/07/06 11:25:31 END OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
>> 2015/07/06 11:25:31 START OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
Choosing roadmap 'STANDARD' from stack file 'G:/usr/sap/trans/EPS/in/DATA/SPS13_stack.xml'.
<< 2015/07/06 11:25:31 END OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
-- Finished execution of 3/3 phases.
< 2015/07/06 11:25:31 END INITIAL MODULE Select roadmap
No items found to display!
No items found to display in 'CHECKS.TXT'!
>> Current module status: selected PREP_EXTRACT, PREP_PRE_CHECK, PREP_INPUT, PREP_INIT, PREP_IMPORT, PREP_PARSETUP
>> Waiting for request handler...
>> Received 'exit' action for unit '<NONE>'.
Running module 'MOD_SELROADMAP' to select correct roadmap.
> 2015/07/06 12:01:41 BEGIN INITIAL MODULE Select roadmap
>> 2015/07/06 12:01:41 START OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
Determined kernel release as 721, 64 bits. System is UNICODE.
<< 2015/07/06 12:01:47 END OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
>> 2015/07/06 12:01:47 START OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
<< 2015/07/06 12:01:47 END OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
>> 2015/07/06 12:01:47 START OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
Choosing roadmap 'STANDARD' from stack file 'G:/usr/sap/trans/EPS/in/DATA/SPS13_stack.xml'.
<< 2015/07/06 12:01:47 END OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
-- Finished execution of 3/3 phases.
< 2015/07/06 12:01:47 END INITIAL MODULE Select roadmap
No items found to display!
No items found to display in 'CHECKS.TXT'!
>> Current module status: selected PREP_EXTRACT, PREP_PRE_CHECK, PREP_INPUT, PREP_INIT, PREP_IMPORT, PREP_PARSETUP
>> Waiting for request handler...
** Remove dead OS process '8024' from internal list.
Running module 'MOD_SELROADMAP' to select correct roadmap.
> 2015/07/06 12:28:20 BEGIN INITIAL MODULE Select roadmap
>> 2015/07/06 12:28:20 START OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
Determined kernel release as 721, 64 bits. System is UNICODE.
<< 2015/07/06 12:28:21 END OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
>> 2015/07/06 12:28:21 START OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
<< 2015/07/06 12:28:21 END OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
>> 2015/07/06 12:28:21 START OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
Choosing roadmap 'STANDARD' from stack file 'G:/usr/sap/trans/EPS/in/DATA/SPS13_stack.xml'.
<< 2015/07/06 12:28:21 END OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
-- Finished execution of 3/3 phases.
< 2015/07/06 12:28:21 END INITIAL MODULE Select roadmap
No items found to display!
No items found to display in 'CHECKS.TXT'!
>> Current module status: selected PREP_EXTRACT, PREP_PRE_CHECK, PREP_INPUT, PREP_INIT, PREP_IMPORT, PREP_PARSETUP
>> Waiting for request handler...
>> Received 'exit' action for unit '<NONE>'.
Running module 'MOD_SELROADMAP' to select correct roadmap.
> 2015/07/06 12:56:55 BEGIN INITIAL MODULE Select roadmap
>> 2015/07/06 12:56:55 START OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
Determined kernel release as 721, 64 bits. System is UNICODE.
<< 2015/07/06 12:56:55 END OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
>> 2015/07/06 12:56:55 START OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
<< 2015/07/06 12:56:55 END OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
>> 2015/07/06 12:56:55 START OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
Choosing roadmap 'STANDARD' from stack file 'G:/usr/sap/trans/EPS/in/DATA/SPS13_stack.xml'.
<< 2015/07/06 12:56:56 END OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
-- Finished execution of 3/3 phases.
< 2015/07/06 12:56:56 END INITIAL MODULE Select roadmap
No items found to display!
No items found to display in 'CHECKS.TXT'!
>> Current module status: selected PREP_EXTRACT, PREP_PRE_CHECK, PREP_INPUT, PREP_INIT, PREP_IMPORT, PREP_PARSETUP
>> Waiting for request handler...
>> Received 'exit' action for unit '<NONE>'.
Running module 'MOD_SELROADMAP' to select correct roadmap.
> 2015/07/06 13:04:28 BEGIN INITIAL MODULE Select roadmap
>> 2015/07/06 13:04:28 START OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
Determined kernel release as 721, 64 bits. System is UNICODE.
<< 2015/07/06 13:04:29 END OF PHASE MOD_SELROADMAP/TOOLVERSXML_ROADMAP
>> 2015/07/06 13:04:29 START OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
<< 2015/07/06 13:04:29 END OF PHASE MOD_SELROADMAP/READ_SHAREDINPUT
>> 2015/07/06 13:04:29 START OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
Choosing roadmap 'STANDARD' from stack file 'G:/usr/sap/trans/EPS/in/DATA/SPS13_stack.xml'.
<< 2015/07/06 13:04:29 END OF PHASE MOD_SELROADMAP/SELECT_ROADMAP
-- Finished execution of 3/3 phases.
< 2015/07/06 13:04:29 END INITIAL MODULE Select roadmap
No items found to display!
No items found to display in 'CHECKS.TXT'!
>> Current module status: selected PREP_EXTRACT, PREP_PRE_CHECK, PREP_INPUT, PREP_INIT, PREP_IMPORT, PREP_PARSETUP
>> Waiting for request handler...
Regards,
Prashanth
Hi,
Check by changing the Currency in Aging Report from 'Business Partner' to 'Local Currency'.
Regards,
Jitin
SAP Business One Forum Team
Hello,
Is there any kind of Block in the Sales order for the Item?
I mean Delivery block at line item level or at schedule line level?
Also are you facing this problem for a particular Sales order or material?
Thanks,
Jignesh Mehta
its not find out please explain clearly
Hi All,
Environment: BPC 10
We have Parent and Child members of MATERIAL dimension in one column.
The adjacent column UOM dimension shows the respective UOM value maintained as property vale against each material in MATERIAL dimension.
In the below screenshot UP_ is the Parent Member and the child members begin with "80xxxxxx".
I have pulled in UOM dimension by linking the UOM property maintained in MATERIAL dimension. And hence it is working as expected.
However, when I double click on the Parent node "UP_" to Collapse and then Expand, the linking dissapears and UOM dimension is pouplated by the UOM value of Parent for all its child members as shown in Fig 2.
Can anyone provide inputs on this?
Fig. 1
Fig. 2
Hi Jai,
Thank you for the Information. :-)
This seems to be issue with MX_INACTIVE attribute only.
I see it working for other attributes (ex. MX_MANAGER).
May be I should test for some custom boolean attribute also. :-)
Regards,
Pradeep
Hi,
I am unable to understand the behavior of the optional prompt in webi.
As of i think. prompt with default value will display when the report is been opened and after user refreshes it then it shows the prompt for the value.
is it correct.? or is there anything wrong to my perception.?
Can anyone answer me about
What is optional prompt.?
Where it can be achieved.?
How to achieve it.?
Functionality or behavior of optional prompt.?
Thanks,
Santhosh
Hi Jim,
I received some help from my BW colleagues. They created an alert which I can then use in bursting or scheduling. What the alert does is tell me when the data load is successful - so that my reports can be triggered to be sent out then.
Thanks
Rahul
Hi Ravi,
And also one more suggestion.
You may be need to update latest patch of XI_TOOLS and MESSAGING Component..
Thanks & Regards,
Sateesh
Hello Mani,
Yes, this comes by-default by HANA Studio where you can export the data into CSV format. For that, you have to select the table data you want to export and then select Export option. In the Export dialog, you will find the option to export as Binary/CSV - select CSV option and you will get the data exported in CSV format. Hope that is what you are looking for.
Regards,
Archana
Hi Experts,
I was developing an bullet with gap diagram refering to this link.
I created an XML view and pasted this code in content of Page.
<ScrollContainer focusable="true" height="100%" horizontal="false" vertical="true" width="100%">
<viz:Popover id="idPopOver"></viz:Popover>
<VBox>
<RadioButton groupName="group1" id="idRadio4" selected="true" text="Horizontal"/>
<RadioButton groupName="group1" id="idRadio5" text="Vertical"/>
</VBox>
<viz:VizFrame height="500px" id="idVizFrameBullet" uiConfig="{applicationSet:'fiori'}" vizType="bullet" width="100%"></viz:VizFrame>
<VBox>
<RadioButton groupName="group2" id="idRadio1" text="above only"/>
<RadioButton groupName="group2" id="idRadio2" text="below only"/>
<RadioButton groupName="group2" id="idRadio3" selected="true" text="both"/>
</VBox>
</ScrollContainer>
But i didn't get my output.
This was error in console.
Please help.
Thank you.
Hello Vikram,
You can either use HTTP destination or URL address. HTTP destination one is the preferred method. For the reason why, you can see my reply in the below mentioned thread -
Proxy receiver channel with HTTP destination or URL address?
The details you need to enter in the HTTP destination to be created can be obtained from the below link -
Michal's PI tips: How do you activate ABAP Proxies with AEX - simplified version
Regards,
Nitin Deshpande
Hi MM
I want to upgrade to SAP BW.
Maybe then , CR CONTENT of solution manager might be old .
Regards,
Toshiki
Hi Jogeswara Rao Kavala,
(Sorry, but I didn't understand what is you private name, Kavala ?)
Thank you so much for your help, I tried to look for the right FM with the COCF_SN*
and the correct answer is : COCF_SN_GET_SHIFTNOTE,
in this FM you just enter the SN Notification number and get the process order number in ES_NOTE structure in Reference_object field.
Regards,
Amit Berku
Hello Everyone,
Can we stop annual leave from overwriting other leaves? We currently had a situation where an employee had maternity leave in the system, and then booked annual leave through the portal (which was approved by the manager), which subsequently overwrote some of the maternity leave in the system. Is there a way to stop the system from allowing the overwrite that comes through the portal?
Please let me know me..
Regards,
Sreekanth.K
Hi Jamil,
First Step
Go to document Numbering series
Administration > System Initialization > Document Numbering
Set Group 1 for Series A (user X will have access for this series)
Set Group 2 for Series B (user Y will have access for this series)
Second Step
Administration > System Initialization >Authorizations > General Authorizations
a)Select user X in users list
b) Expand > Administration > System Initialization > Numbering Series > Series - Group No. 1 - Full Authorization
and for Group No 2 to group No.10 - No Authorization
c) Select user Y in users list
Group No. 1 - No authorization
group No.2 - Full authorization
Group No 3-10 - No authorization.
All the best
Unnikrishnan
Hi Guru,
Please check your BP & T-lanes are in place. BP should be assigned to Location also in Location master.
Regards,
Rahul